Modular Contactor With Motor Wiring:

This diagram shows how to make a Modular Contactor With Motor Wiring. In this circuit, we use a DP MCB ( Double Pole Minature Circuit Breker ), an RCCB ( Residual Current Circuit Diagram ), a module contactor, a timer, and a motor. First, we need to connect the DP MCB with the power source, then connect RCCB with DP MCB, then connect modular with RCCB, then connect the timer with the module contactor, and lastly, we need to connect the motor.

Diagram of Modular Contactor With Motor:

Components needed For this Project:

You can get the components from any of the sites below:

DP MCB 20A [See Buy Click Amazon]
DP RCCB 16A [See Buy Click Amazon]
Magnetic Contactor 25A [See Buy Click Amazon]
8 Pin Timer 220V AC [See Buy Click Amazon]
Single Phase Motor (1 HP) [See Buy Click Amazon]

*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Read Also:

Components used to make the Modular Contactor With Motor Wiring:

01. DP MCB:

DP MCB In 2 Pole MCB, switching & protection is affected in phases and the neutral. A Double Pole or DP Switch is a Switch that Controls 2 Circuits at the same time. In terms of Residential Switching, this Normally means it Switches the live and Neutral at the same time. In Layperson Terms, Double Pole switches or DP Switches are Exclusively Designed to Control 2 Different Electrical Circuits at the same time, which allows the Appliances to Isolate safely and reliably. Fan or light Combinations and Medical Equipment are some of the many applications for DP Electrical Switches and Electrical components.

02. RCCB:

The Residual Current Circuit breaker RCCB is the Safest device to detect and Trip against Electrical Leakage current. This ensures protection against Electric shock Caused by indirect contact. Circuit breakers (CB) are automatically Operated Electrical Switches that Protect Electrical Circuits from Short-Circuiting or Overloading systems. It Protects against many major accidents. RCCB Circuit Breaker is an Electrical Wiring device whose function is to disconnect the current in the circuit.

03. Magnetic Contactor:

A magnetic contactor is an electromagnetic switching device. It is generally used for controlling 3-phase Motors. The operation of a magnetic contactor is similar to that of a Relay. but a relay is used for low-power or low-voltage connections, and a magnetic contactor is used for high-power or high-voltage connections. As soon as the supply is applied to the magnetic contactor coil. its normally open contacts are closed and normally closed contacts are opened and the associated devices are also operated. This is how a magnetic contactor works.

04. Timer:

A timer is a type of time-switching device that controls and controls Electrical circuits and electrical and electronic devices through time setting (on/off). The timer is basically 8-pin. Like other controlling devices the timer has a coil and when this coil is magnetized, the timer works on/off. The timer has 2 common ends and each common end has normally close and normally open options. When the timer is set by time, the timer trips at the end of that time and turns the common is normally closed (on) to open (off) and normally open (off) to close (on). This is how the timer works.

05. Single Phase Motor:

A Single-Phase Motor is an Electrically-Powered Rotary Machine That Can Turn Electric Energy into Mechanical Energy. It Works by Using a Single-Phase Power Supply. Single-phase Motors Are Used in Equipment And Machines That Are Smaller in Size And Require Lower Horsepower. This Includes Equipment Such As Refrigerators, Pumps, Compressors, Fans, and Portable Drills. Single-phase motors Have a Similar Construction to The 3-phase Motor, Including an AC Winding That is Placed on The Stator And Short-Circuited Conductors That are Placed in a Cylindrical Rotor.

Thank You for visiting the website. Keep visiting for more Updates.

Frequently asked questions

Why are modular contactors used?

Modular contactors are chiefly used in the field of facilities installations: to switch or control lighting systems, heating, ventilation, pumps, heat pumps and air conditioning, and other building automation requirements.

What is a modular contactor?

A modular contactor is a type of mechanical connector that is mounted on a rail in control cabinets. The design of the contactor consists of working contacts - 1 or more pairs, a coil, or an electromagnet.

What is the difference between a contactor and a modular contactor?

Both contactors or modular contactors have the same purpose of controlling the flow of current in a circuit diagram, while the main difference lies in their design or application.

Which is better SSR or contactor?

The SSR could operate at a faster cycle (on-off) time than a comparable mechanical contactor. However, the SSR has a higher contact resistance and is susceptible to damage from surge currents. It also has limited switching arrangements compared to an electromechanical contactor (typically an SPST contact).

What is a purpose contactor?

A definite purpose (DP) contactor is an electronically-controlled switch designed for use with switching power supply circuits. These contractors were initially designed for a specific purpose, hence the name “definite purpose.”

← Previous Next →

Modular Contactor With Motor Wiring