Music Reactive LED Chaser Circuit - Simple Electronic Project

Introduction

content

content

content

Diagram of Music Reactive LED Circuit

Advertisements

Advertisements

Components Needed for this Project:

You can get the components from any of the sites below:

  1. BC547 Transistor [See Buy Click Amazon]
  2. 100k Ohm Resistor [See Buy Click Amazon]
  3. LED 5mm [See Buy Click Amazon]

*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Related Basic Electronic Mini Project Circuit Diagram:

Advertisements

Advertisements

Working Principle

content

content

content

Frequently asked questions

Can smart lights change to music?

lights have a dedicated music mode, enable that, and whenever the lights are on and music is bumping, they'll dance to the music for BC547 Transistor.

How do 9-volt LED lights work?

How do they work? An Electronic current passes through a microchip, which illuminates the tiny light sources we call LEDs and the result is visible light Circuit. To prevent performance issues, the heat LEDs produce is absorbed into a heat sink for the Transistor.

What is the voltage of an LED?

between 9 volts Typically, the forward voltage of an LED is between 1.8 and 3.3 volts. A red LED typically drops around 1.7 to 2.0 volts, but since both voltage drop and light frequency increase with a band gap, a blue LED may drop around 3 to 3.3 volts.

What is an LED power supply?

Specifically, it is a power supply 9V DC Line designed to provide the current necessary for lighting applications such as LED. As opposed to conventional DC power supplies that supply energy.

What is an LED unit?

A light-emitting diode (LED) is a semiconductor device that emits light when current flows Circuit through it. Electrons LED Products in the semiconductor recombine with electron holes.

Related Articles