Fluorescent Light Connection:

This diagram shows how to make Fluorescent Light Connection. In this circuit, we use a fluorescent tube light, an electric ballast choke, and an SPST switch. First, we need to input the phase line to the switch, then input the neutral connection to the ballast choke. Then input power to the fluorescent tube light from the ballast choke. Now this circuit is ready for use.

Diagram of Fluorescent Light Connection:

Components needed For this Project:

You can get the components from any of the sites below:

Fluorescent Tube [See Buy Click Amazon]
Electric ballast Choke [See Buy Click Amazon]
SPST Switch [See Buy Click Amazon]

*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Read Also:

Components used to make the Fluorescent Light Connection:

01. Fluorescent Tube:

The structural element of the tube light is an airtight glass tube which is commonly called a sealed glass tube. This tube is airtight. The tube fills with a small amount of mercury. Also contains an inert gas (usually argon). The tube inside is also coated with phosphorus. That is why it looks white. There are 2 electrodes at both ends of the tube which can create an electric field between them. These 2 electrodes are again connected to an electrical circuit. Electrical This circuit usually consists of a starter switch and ballast. This circuit is connected to our AC supply. The difference between ordinary incandescent bulbs and fluorescent bulbs (which we call tube lights) is the process of activating or exciting the atoms. In normal bulbs, the atoms are activated by heating. In fluorescent bulbs. this is done through accelerated chemical reactions.

02. Electric Ballast Choke:

After the starter, the important component responsible for lighting the tube light is the ballast. The primary role of the ballast in a tube light system is as a current regulator and illuminant. This ensures adequate voltage and waveform supply to the tube light. The type of ballast we used to see in old-fashioned tube light systems is actually an Electrical ballast that preheats the tube light. Ballast means balancing. Basically the tube light system also ballast plays the role of a balancer. It stabilizes the current and voltage. If a tube light is connected directly to the main line without this ballast, excessive current will flow through the tube light. As a result, the tube light will be destroyed almost immediately.

03. Switch:

An SPST (Single Pole Single Throw) Switch is a Switch That only Has a Single Input and can Connect Only to one Output. This means it Only Has one Input Terminal and Only 1 Output Terminal. A Switch is a Mechanical or Controlling Device That Changes the Flow of Current Direction or Interrupts the Flow of Current Within a Circuit diagram. An electrical line using Single Pole Single Throws (SPST) is Perfect for on-off switching. When the SPST is closed, the Circuit is Closed and the light from the lamp switches on the system. When The Single Pole Single Throw (SPST) is then opened, the light from the lamp goes out and the Circuit is off.

Thank You for visiting the website. Keep visiting for more Updates.

← Previous Next →

Fluorescent Light Connection