power factor to voltage calculator
Convert power factor, power, and current to voltage using V= P/(I*PF) Useful for AC circuit analysis and electrical load calculations.
Advertisement
power factor voltage formula
To calculate such power factor to voltage V = P / (I x PF) To determine voltage where P is power Three phase AC circuits: V = P / ( 3 days ahysPiPF).
Formula & Table Summary:
- Single-phase: \( V = \frac{P}{I \times PF} \)
- Three-phase: \( V = \frac{P}{\sqrt{3} \times I \times PF} \)
Units: P (W), I (A), V (V), PF (0–1).
Sponsored
voltage calculation from PF
A Power Factor to Voltage Calculator can calculate AC voltage in terms of power, current and power factor. In single phase systems use V = P/ (I x PF) On three-phase systems: V = P/( 3 1)PF.
power factor to voltage calculator
| Power (W) | Current (A) | PF | Phase | Calculation | Voltage (V) |
|---|---|---|---|---|---|
| 1000 | 5.0 | 1.00 | 1Φ | V=1000/(5×1) | 200.0 |
| 1500 | 10.0 | 0.80 | 1Φ | V=1500/(10×0.8) | 187.5 |
| 3000 | 8.0 | 0.90 | 3Φ | V=3000/(√3×8×0.9) | 240.3 |
| 750 | 3.0 | 0.75 | 1Φ | V=750/(3×0.75) | 333.3 |
| 5000 | 12.0 | 0.85 | 3Φ | V=5000/(√3×12×0.85) | 283.5 |
Advertisement
Frequently Asked Questions - power factor to voltage calculator:
Use V = P / (I × PF) for single-phase or V = P / (√3 × I × PF) for three-phase AC.
Power factor is the ratio of real power to apparent power, between 0 and 1.
Because real power is lower for the same apparent power, requiring higher voltage for the same output.
No, PF is 1 in DC, so V = P / I.
Watts for P, amperes for I, volts for V, dimensionless PF.
Use a power meter that displays real power, apparent power, and calculates PF.
No, in practical systems PF ≤ 1.
Reactive power does not contribute to real work but affects PF and apparent power.
No, formula assumes balanced loads for three-phase systems.
Add power factor correction capacitors or synchronous condensers.
