Godown wiring:

This diagram shows how to make godown wiring. In this circuit diagram, we use an SPST switch ( Single Pole Single Throw ), and 2 SPDT ( Single Pole Double Throw) switch, and 3 CFL light. First, we need to input the phase line to the SPST switch, then input the phase line to all SPDT switches from the SPST switch. Then input phase line to all light from switches. And last we need to input a neutral connection to all light. Now our circuit is ready for use. If you want to know more about this circuit please check our youtube video below the post.


Diagram of Godown wiring:

Godown wiring

Components needed For this Project:

You can get the components from any of the sites below:

  1. CFL Light [See Buy Click Amazon]
  2. SPST Switch [See Buy Click Amazon]
  3. 2 way switch [See Buy Click Amazon]

*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Read Also:


Components used to make the Godown wiring:

01. Light:

CFL stands for Compact Fluorescent Lamp which is an improved version of tube lights of earlier days. Like tube lights, it is a vacuum glass tube with fluorescent powder coating which is not as long and straight as tube lights but curved/twisted compact, or small in size. Like a tube light, it has electrodes or filaments at both ends. But in this case, instead of a choke, there is an electronic circuit that drives the Compact Fluorescent Lamp. Because the red wave is less in the light of the Tubelight and Compact Fluorescent Lamp, the object looks a little pale or the correct color of the object does not appear.

02. SPST Switch:

An SPST (Single Pole Single Throw) Switch is a Switch That only Has a Single Input and can Connect Only to one Output. This means it Only Has one Input Terminal and Only 1 Output Terminal. A Switch is a Mechanical or Controlling Device That Changes the Flow of Current Direction or Interrupts the Flow of Current Within a Circuit diagram. An electrical line using Single Pole Single Throws (SPST) is Perfect for on-off switching. When the SPST is closed, the Circuit is Closed and the light from the lamp switches on the system. When The Single Pole Single Throw (SPST) is then opened, the light from the lamp goes out and the Circuit is off.

03. SPDT Switch:

The 2-Way Switch has a wire connection system. It is a type of switch that has three wire connections. And it really has no off or on. Both sides can be turned on or off depending on how you connect one to the other. The connection of the two-way switch is different. If you use it as a changer, then put the load in the middle one and two separate lines in the upper and lower ones. The two-way switch is a type of multiway switch. Multiway switches have more points and can be controlled in multiple ways simultaneously.

Thank You for visiting the website. Keep visiting for more Updates.

Frequently asked questions

How many types of godowns are there?

Public warehouses, private warehouses, bonded warehouses, smart warehouses, and consolidated warehouses are some of the power supply different types of warehouses available.

What is stored in the godown?

Stored goods can include any raw materials, packing materials, the Circuit Diagram spare parts, components, or finished goods associated with agriculture, manufacturing, and production. the Currenttlou In India and Hong Kong, a warehouse may be referred to as a "godown"

What are the conditions for godown?

The bags of grains should be stored in covered premises, the Circuit Diagram which are well protected from sun, heat, moisture, excessive heat, insects, and rodents. The godown should be made on a well-built platform of a height of not less than 1ft. from ground level to prevent soil moisture and dampness.

How to create a godown in Tally?

In order to create godowns, you have to ensure that the option Enable Multiple Excise Units is set to Yes in the Excise Registration Details screen. Gateway of Tally > Create > type or select Godown > and press Enter. Alternatively, press Alt+G (Go To) > Create Master > Godown > and press Enter.

How to delete a godown in Tally?

Go to Gateway of Tally > Inventory Info. > Locations/Godowns > Alter (under Multiple Locations/Godowns). You can delete a Godown/ location via Single Godown/Location Alter by pressing [Alt]+[D]. project system However, you cannot delete a Godown/location with sub-locations.

Read more Single Phase Wiring


Submit a Comment

Your email address will not be published. Required fields are marked *