Motion Sensor Connection Diagram:
This diagram shows how to make a motion sensor connection diagram. In this circuit, we use a PIR Motion Sensor, a light, a DP MCB ( Double Pole Miniature Circuit Breaker ), and a 2-way switch. First, we need to input power to DP MCB, then input phase connection to light, switch, and motion sensor, then input neutral connection to a motion sensor and light. Now this circuit is ready for use. If you want to know more about this circuit please check our youtube video below the post.
Components needed For this Project:
You can get the components from any of the sites below:
- Motion Sensor [See Buy Click Amazon]
- CFL Light [See Buy Click Amazon]
- DP MCB [See Buy Click Amazon]
- 2-Way Switch [See Buy Click Amazon]
*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!
Components used to make the Motion Sensor Connection:
Photocells and Motion Sensors are Electronic Devices you can use to Manage Indoor or Outdoor Lighting. The Main Difference Between Photocells and Motion Sensors is that the Former Detects change in light Levels, and The Latter React to Physical Movement. Movement in the Detection area Changes the Reflected Signals and Activates the Sensor. They also save Energy by Turning Themselves off when Light is Unnecessary. Many Motion Sensors use a Combination of Detection Methods to Provide enhanced Coverage and eliminate false positives. The adjustable timers built into some Sensors let you Control how long the Attached Lights Remain Active after it Detects Motion.
02. CFL Light:
CFL stands for Compact Fluorescent Lamp which is an improved version of tube lights of earlier days. Like tube lights, it is a vacuum glass tube with fluorescent powder coating which is not as long and straight as tube lights but curved/twisted compact, or small in size. Like a tube light, it has electrodes or filaments at both ends. But in this case, instead of a choke, there is an electronic circuit that drives the Compact Fluorescent Lamp. Because the red wave is less in the light of the Tubelight and Compact Fluorescent Lamp, the object looks a little pale or the correct color of the object does not appear.
DP MCB In Two Pole MCB, switching & protection is affected in phases and the neutral. A Double Pole or DP Switch is a Switch that Controls two Circuits at the same time. In terms of Residential Switching, this Normally means it Switches the live and Neutral at the same time. In Layperson Terms, Double Pole switches or DP Switches are Exclusively Designed to Control two Different Electrical Circuits at the same time, which allows the Appliances to Isolate in a safe and reliable manner. Fan or light Combinations and Medical Equipment are some of the many applications for DP Electrical Switches.
02. 2-Way Switch:
Two Way Switch has three wire connection system. It is a type of switch that has three wire connections. And it really has no off or on. Both sides can be turned on or off depending on how you connect one to the other. The connection of the two-way switch is different. If you use it as a changer, then put the load in the middle one and two separate lines in the upper and lower ones. The two-way switch is a type of multiway switch. Multiway switches have more points and can be controlled in multiple ways simultaneously.
Thank You for visiting the website. Keep visiting for more Updates.
Read more Single Phase Wiring
3 Phase Motor Starter Wiring: This diagram shows how to make 3 Phase Motor Starter Wiring. In this circuit, we use a...
Start Button and Stop Button Wiring: This diagram shows how to make Start Button and Stop Button Wiring. In this...
3 phase motor starter wiring: This diagram shows how to make Three phase motor starter wiring diagram. In this...