SSR With Motor connection

Electrical, single phase Line Wiring | 0 comments

Electrical        1 Phase Wiring        3 Phase Wiring        Power System       Arduino Project        Arduino Board        Robotics Sensors       Robotics Module        Robotics Display       Electronic       Power Electronic        Electronic Project

SSR With Motor connection:

This diagram shows how to make SSR With a Motor connection. In this circuit, we use a DP MCB ( Double Pole Minature Circuit Breaker ), a selector switch, an SSR ( Solid State Relay ), and a single-phase motor. First, we need to connect the DP MCB with the power source, then connect the SSR and selector switch, and then connect the motor with SSR.

Diagram of SSR With Motor connection:

SSR With Motor connection

Components needed For this Project:

You can get the components from any of the sites below:

  1. DP MCB [See Buy Click Amazon]
  2. SSR [See Buy Click Amazon]
  3. Selector Switch [See Buy Click Amazon]
  4. Single Phase Motor [See Buy Click Amazon]

*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Read Also:

Components used to make the SSR With Motor connection:

01. DP MCB:

DP MCB In Two Pole MCB, switching & protection is affected in phases and the neutral. A Double Pole or DP Switch is a Switch that Controls two Circuits at the same time. In terms of Residential Switching, this Normally means it Switches the live and Neutral at the same time. In Layperson Terms, Double Pole switches or DP Switches are Exclusively Designed to Control two Different Electrical Circuits at the same time, which allows the Appliances to Isolate in a safe and reliable manner. Fan or light Combinations and Medical Equipment are some of the many applications for DP Electrical Switches.

02. SSR:

3 Phase Solid State Relay is a fully Integrated Device with a Heat sink and DIN rail Mounting plate in a Space-Saving design. Each unit is Touch-Safe with LED input Indication. This Normally Open, Zero-Crossing device is Capable of Millions of Cycles of Operation. There are three main types of solid-state relay isolation methods used in SSRs, i.e., optical, transformer, and reed Solid-state relays are the semiconductor equivalents of electromechanical relays and therefore can be used to control electrical loads.

03. Selector Switch:

A Mechanical Switch That can be rotated Left, right, or center to open or close the electrical contacts is known as a Selector switch. The Main Function of This Selector Switch is to Control Devices and also to Switch Between a Minimum of 2 or Above Electrical Circuits. The Perfect Used for Selector Switch is When Used for Controlling an Output of a Device. We know that a Selector switch is Used to control the electrical current flow in a Circuit it can also be used to both Initiate and inhibit the Current Flow.

04. Single Phase Motor:

A Single-Phase Motor is an Electrically-Powered Rotary Machine That Can Turn Electric Energy into Mechanical Energy. It Works by Using a Single-Phase Power Supply. Single-phase Motors Are Used in Equipment And Machines That Are Smaller in Size And Require Lower Horsepower. This Includes Equipment Such As Refrigerators, Pumps, Compressors, Fans, and Portable Drills. Single-Phase Motors Have a Similar Construction to The Three-Phase Motor, Including an AC Winding That is Placed on The Stator And Short-Circuited Conductors That are Placed in a Cylindrical Rotor.

Thank You for visiting the website. Keep visiting for more Updates.

Read more Single Phase Wiring

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *