2-Way Light Switch Wiring 6 methode:

This diagram shows how to make 2-way light switch wiring |6 methods switch connection. In this circuit, we use two 2-way switches and a light. First, we need to input the phase and neutral line to switch one, then connect another switch with switch one. Then input power to light from switch exact our diagram. Now our circuit is ready for use. If you want to know more about this circuit please check our youtube video below the post.


Diagram of 2 Way Light Switch wiring 6 methode:

2 Way Light Switch wiring | 6 methode switch connection

Components needed For this Project:

You can get the components from any of the sites below:

  1. 2 way switch [See Buy Click Amazon]
  2. CFL Light [See Buy Click Amazon]

*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Read Also:


Components used to make the 2 Way Light Switch wiring 6 methode:

01. 2-Way Switch:

The 2-Way Switch has a wire connection system. It is a type of switch that has three wire connections. And it really has no off or on. Both sides can be turned on or off depending on how you connect one to the other. The connection of the two-way switch is different. If you use it as a changer, then put the load in the middle one and two separate lines in the upper and lower ones. The two-way switch is a type of multiway switch. Multiway switches have more points and can be controlled in multiple ways simultaneously.

02. Light:

CFL stands for Compact Fluorescent Lamp which is an improved version of tube lights of earlier days. Like tube lights, it is a vacuum glass tube with fluorescent powder coating which is not as long and straight as tube lights but curved/twisted compact, or small in size. Like a tube light, it has electrodes or filaments at both ends. But in this case, instead of a choke, there is an electronic circuit that drives the Compact Fluorescent Lamp. Because the red wave is less in the light of the Tubelight and Compact Fluorescent Lamp, the object looks a little pale or the correct color of the object does not appear.

Thank You for visiting the website. Keep visiting for more Updates.

Frequently asked questions

How to convert a 2-way switch to a 1-way?

Most 2-way switches have a Common terminal, as well as an L1 and L2 terminal. For two-way switching, you will need to connect both L1 and L2. For 1-way switching, as you have 1 less connection, you only need to use the L1 connection. You can leave the power supply L2 connection blank.

What is an example of a 2 way switch?

Suppose you are on the top of the stairs and want to turn on the Project system light above the stairs, then using the 2-way switch you can turn on/off the same light in 2 different areas or locations. Here you can turn on the stairs light either from the top of the power supply stairs or from the bottom stairs using the 2-way switch.

Are there 2-way switches?

In a 2-way switch, there are two, 1-way switches combined in one. 1 of the terminals can be connected to either of the two, but not both at the same time. The advantage of a 2-way switch is the ability to control a single device from 2 separate locations.

Can you wire a 2 way switch 1 way?

Yes, a 2-way switch can easily operate as a 1-way. A 2-way switch is, at least in all the cases I know of, identical to a 1-way switch, except that it has two sets of contacts and a common one. Simply omit wiring the second and contact, and, of course, omit the second switch.

What is 2 way 3 way switch?

Much like the 2-way switch, a three-way switch turns a light on or off. However, there is a crucial difference. The 3-way switch is used in conjunction with another three-way switch. Each one of them has a power supply to interrupt the electrical flow and turn the light off from a different part of the room.

Read more Single Phase Wiring


Submit a Comment

Your email address will not be published. Required fields are marked *