Amps (A) to Kilovolt-amps (KVA) Conversion Calculator

Amps (A) to Kilovolt-amps (KVA) Calculator.

Enter Phase Select (single phase, 3 phase), the current (I) in amps (A), the voltage (V) in volts (v), and press the calculate button to get the Apparent Power (S) in kilovolt-amps (KVA):

Advertisements

Note, For higher values like 5×10³, 10×10^-6, 1.6 x10¹², enter the value like this for scientific notation as 5e3, 10e-6, 1.6e12, etc.

Conversion Using the Power Formula :

AC Single Phase Amps to KVA Calculation:

Short Note:

For example, let’s find the voltage of a circuit with 1.2 amps of current and 20 ohms of resistance.

V_(V) = 1.2 A ÷ 20 Ω
V_(V) = 24 V

Ac Three Phase Amps to KVA Calculation :

Calculation with Line to Line Voltage:

Short Note:

For example, let’s find the voltage of a circuit with 1.2 amps of current and 20 ohms of resistance.

V_(V) = 1.2 A ÷ 20 Ω
V_(V) = 24 V

Calculation with Line to Neutral Voltage:

Short Note:

For example, let’s find the voltage of a circuit with 1.2 amps of current and 20 ohms of resistance.

V_(V) = 1.2 A ÷ 20 Ω
V_(V) = 24 V

Where:

• • P = Power in watts
  • V = Voltage in volts
  • I = Current in amperes
  • S = Apparent Power in Kilo-volt-amps (Kva)
  • Cosθ = Power factor in AC circuits
  • V_L-L = Line to Line Voltage in 3-Phase Circuits
  • V_L-N = Line to Neutral Voltage in 3-Phase Circuits

Advertisements

How to use This Calculator?

To use the above “Amps to KVA Conversion Calculator” follow the below steps:

01. Select Phase Type: Choose between “Single Phase” or “3 Phase” by choosing the appropriate option from the dropdown.

02. Enter Current: Input the Current in Amps value in the specified input box. You can enter the value in A or KA by choosing the appropriate option from the dropdown.

03. Enter Supply Voltage: Input the supply voltage or motor voltage value in the specified input box. You can enter the value in Volts or Kilovolts by choosing the appropriate option from the dropdown.

04. Select Voltage Type: Choose between “Line to Line Voltage” or “Line to Neutral Voltage” by choosing the appropriate option from the dropdown.

05. Reset: If you want to “reset” the calculator to perform another conversion, you can click the “Reset” button, and all input fields will be cleared.

06. Calculate: Click the “Calculate” button to obtain the results. The calculated results will be displayed in the “Results:” section.

07. Swap: If you want to “Swap” the calculated to Exchange conversion, you can click the “Swap” button, and Calculate will be Exchange.

08. Result: The calculated “result” will be displayed in the respective “Result In KVA” output field.

Amps to Volts Conversion table:

Related Articles