Motor Connection With Float Switch Wiring:

This diagram shows how to make a motor Connection With Float Switch Wiring. In this circuit, we use a DP MCB ( Double Pole Minature Circuit Breaker ), an RCCB ( Residual Current Circuit Breaker ), a float switch, a selector switch, and a single-phase motor. First, we need to connect the DP MCB with the power source. Then connect another component to the circuit.

Diagram of Motor Connection With Float Switch Wiring:

Components needed For this Project:

You can get the components from any of the sites below:

DP MCB 20A [See Buy Click Amazon]
DP RCCB 16A [See Buy Click Amazon]
Magnetic Contactor 40A [See Buy Click Amazon]
Selector Switch (220V AC) [See Buy Click Amazon]
Single Phase Motor (1 HP) [See Buy Click Amazon]
Float Switch Water Level Controller [See Buy Click Amazon]

*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Read Also:

Components used to make the Motor Connection With Float Switch Wiring:

01. DP MCB:

DP MCB In 2 Pole MCB, switching & protection is affected in phases and the neutral. A Double Pole or DP Switch is a Switch that Controls 2 Circuits at the same time. In terms of Residential Switching, this Normally means it Switches the live and Neutral at the same time. In Layperson Terms, Double Pole switches or DP Switches are Exclusively Designed to Control 2 Different Electrical Circuits at the same time, which allows the Appliances to Isolate safely and reliably. Fan or light Combinations and Medical Equipment are some of the many applications for DP Electrical Switches and Electrical components.

02. RCCB:

The Residual Current Circuit breaker RCCB is the Safest device to detect and Trip against Electrical Leakage current. This ensures protection against Electric shock Caused by indirect contact. Circuit breakers (CB) are automatically Operated Electrical Switches that Protect Electrical Circuits from Short-Circuiting or Overloading systems. It Protects against many major accidents. RCCB Circuit Breaker is an Electrical Wiring device whose function is to disconnect the current in the circuit.

03. Magnetic Contactor:

A magnetic contactor is an electromagnetic switching device. It is generally used for controlling 3-phase Motors. The operation of a magnetic contactor is similar to that of a Relay. but a relay is used for low-power or low-voltage connections, and a magnetic contactor is used for high-power or high-voltage connections. As soon as the supply is applied to the magnetic contactor coil. its normally open contacts are closed and normally closed contacts are opened and the associated devices are also operated. This is how a magnetic contactor works.

04. Selector Switch:

A Mechanical Switch That can be rotated Left, right, or center to open or close the Electrical contacts is known as a Selector switch. The Main Function of This Selector Switch is to Control Devices and also to Switch Between a Minimum of 2 or Above Electrical Circuits. The Perfect Used for Selector Switch is When Used for Controlling the Output of a Device. We know that a Selector switch is Used to control the electrical current flow in a Circuit it can also be used to both Initiate and inhibit the Current Flow.

05. Single Phase Motor:

A Single-Phase Motor is an Electrically-Powered Rotary Machine That Can Turn Electric Energy into Mechanical Energy. It Works by Using a Single-Phase Power Supply. Single-phase Motors Are Used in Equipment And Machines That Are Smaller in Size And Require Lower Horsepower. This Includes Equipment Such As Refrigerators, Pumps, Compressors, Fans, and Portable Drills. Single-phase motors Have a Similar Construction to The 3-phase Motor, Including an AC Winding That is Placed on The Stator And Short-Circuited Conductors That are Placed in a Cylindrical Rotor.

06. Float Switch:

A Float Switch is a type of Level Sensor Device Used to Detect the level of liquid within a tank. The Switch May be Used to Control a Pump, as an Alarm, as an Indicator, or to Control Other Devices. 1 type of Float Switch Uses a Mercury Switch Inside a Hinged float. Another common type is a Float Switch That Raises a rod to Actuate a Microswitch. One Pattern Uses a reed Switch Mounted in a Tube Float, Containing a Magnet, Surrounding the Tube, and Guided by it.

Thank You for visiting the website. Keep visiting for more Updates.

Frequently asked questions

Why are there 3 wires on a float switch?

Your float switch has a 3-wire configuration, which could be used to make connections for either filling or emptying. For “Normally Full” Operation, where the desire to activate a pump to Fill a tank, sump, and vessel, use the Black and Blue Wires for connection, or cap the Brown wire.

How long can the float switch last?

They last a very long time. Some Kari Float Switches have been in service for over twenty years. They're also easy to use. A simple weight acts as the anchor point and could be adjusted to lengthen the distance between the switch of the points.

What are the components of a float switch?

Float switches have a reed switch and a pivoted magnet and can be used for normally open (N/O) or normally closed (N/C) operations. The switch action could be reversed rotating the switch through 180°.

What is a float switch also called?

Often called a mechanical level of the switch or magnetic level switch, they detect the liquid using 3 basic components, a float, a magnet, and a switch. The simplicity of the product is it is strength.

What are the two types of float switches?

There are 2 types of float switches: stem-mounted float switches or cable-suspended switches. These float switches could be horizontal or vertical. There are many ways to monitor the amount of liquid in a tank.

← Previous Next →

Motor Connection With Float Switch Wiring