Photocell sensor installation:
This diagram shows how to make a photocell sensor installation. In this circuit, we use a DP MCB, an RCCB, a photocell sensor, a selector switch, a contactor, an overload, and a single-phase motor. First, we need to connect the DP MCB with the power source, then connect the RCCB with the DP MCB, then connect the photocell sensor with the RCCB, then connect the selector switch, then connect the contactor and pump motor with the photocell.
Diagram of Photocell sensor installation:
Components needed For this Project:
You can get the components from any of the sites below:
- DP MCB [See Buy Click Amazon]
- RCCB [See Buy Click Amazon]
- Photocell Sensor [See Buy Click Amazon]
- Selector Switch [See Buy Click Amazon]
- Magnetic Contactor [See Buy Click Amazon]
- Single Phase Motor [See Buy Click Amazon]
*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!
Components used to make the Photocell sensor installation:
DP MCB In Two Pole MCB, switching & protection is affected in phases and the neutral. A Double Pole or DP Switch is a Switch that Controls two Circuits at the same time. In terms of Residential Switching, this Normally means it Switches the live and Neutral at the same time. In Layperson Terms, Double Pole switches or DP Switches are Exclusively Designed to Control two Different Electrical Circuits at the same time, which allows the Appliances to Isolate in a safe and reliable manner. Fan or light Combinations and Medical Equipment are some of the many applications for DP Electrical Switches.
The Residual Current Circuit breaker RCCB is the Safest device to detect and Trip against Electrical Leakage current, thus Ensuring Protection against Electric shock Caused by indirect contact. Circuit breakers are automatically Operated Electrical Switches that Protect Electrical Circuits from Short-Circuiting or Overloading. It Protects against many major accidents. RCCB Circuit Breaker is an Electrical Wiring device whose function is to disconnect the current in the circuit.
Photocells and Motion Sensors are Electronic Devices you can use to Manage Indoor or Outdoor Lighting. The Main Difference Between Photocells and Motion Sensors is that the Former Detects change in light Levels, and The Latter React to Physical Movement. Movement in the Detection area Changes the Reflected Signals and Activates the Sensor. They also save Energy by Turning Themselves off when Light is Unnecessary. Many Motion Sensors use a Combination of Detection Methods to Provide enhanced Coverage and eliminate false positives. The adjustable timers built into some Sensors let you Control how long the Attached Lights Remain Active after it Detects Motion.
04. Selector Switch:
A Mechanical Switch That can be rotated Left, right, or center to open or close the electrical contacts is known as a Selector switch. The Main Function of This Selector Switch is to Control Devices and also to Switch Between a Minimum of 2 or Above Electrical Circuits. The Perfect Used for Selector Switch is When Used for Controlling an Output of a Device. We know that a Selector switch is Used to control the electrical current flow in a Circuit it can also be used to both Initiate and inhibit the Current Flow.
A magnetic contactor is an electromagnetic switching device. It is generally used for controlling three-phase motors. The operation of a magnetic contactor is similar to that of a relay, but a relay is used for low-power or low-voltage connections, and a magnetic contactor is used for high-power or high-voltage connections. As soon as the supply is applied to the magnetic contactor coil, its normally open contacts are closed and normally closed contacts are opened and the associated devices are also operated. This is how a magnetic contactor works.
06. Single Phase Motor:
A Single-Phase Energy Meter is a sort of Watt-Hour meter. It consists of two Electromagnets. Single-Phase Energy Meter is also Popularly known as a watt-hour meter. One Magnet is called the shunt magnet Ml which is Mounted with a Pressure coil. The Pressure coil is a long coil Made of fine Copper wire which is connected across the Supply line. Single-phase energy meters are suitable for measuring single-phase AC current frequencies of 50/60 Hz, which are used for fixed indoor installations.
Thank You for visiting the website. Keep visiting for more Updates.
Read more Single Phase Wiring
3 Phase Motor Starter Wiring: This diagram shows how to make 3 Phase Motor Starter Wiring. In this circuit, we use a...
Start Button and Stop Button Wiring: This diagram shows how to make Start Button and Stop Button Wiring. In this...
3 phase motor starter wiring: This diagram shows how to make Three phase motor starter wiring diagram. In this...