How To Make Two Motor in Two Way Switch:
This Diagram shows a Single phase 2 motor 2-way switch control. A single-phase motor is an electrically-power rotary machine that can turn electric energy into mechanical energy Run. It works by using a single-phase power supply of 220V ac Line.
Single phase two Motor 2 way switch control Wiring Diagram:
Components needed For this Project:
You can get the components from any of the sites below:
- Single Phase Motor [See Buy Click Amazon]
- Magnetic Contactor [See Buy Click Amazon]
- DP MCB [See Buy Click Amazon]
- 2-way Switch [See Buy Click Amazon]
*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!
Components used to make the 2 Motor in Two Way Switch:
01. Single Phase Motor:
A Single-Phase Motor is an Electrically-Powered Rotary Machine That Can Turn Electric Energy into Mechanical Energy. It Works by Using a Single-Phase Power Supply. Single-phase Motors Are Used in Equipment And Machines That Are Smaller in Size And Require Lower Horsepower. This Includes Equipment Such As Refrigerators, Pumps, Compressors, Fans, and Portable Drills. Single-Phase Motors Have a Similar Construction to The Three-Phase Motor, Including an AC Winding That is Placed on The Stator And Short-Circuited Conductors That are Placed in a Cylindrical Rotor.
02. Magnetic Contactor:
A magnetic contactor is an electromagnetic switching device. It is generally used for controlling three-phase motors. The operation of a magnetic contactor is similar to that of a relay, but a relay is used for low-power or low-voltage connections, and a magnetic contactor is used for high-power or high-voltage connections. As soon as the supply is applied to the magnetic contactor coil, its normally open contacts are closed and normally closed contacts are opened and the associated devices are also operated. This is how a magnetic contactor works.
03. DP MCB:
DP MCB In Two Pole MCB, switching & protection is affected in phases and the neutral. A Double Pole or DP Switch is a Switch that Controls two Circuits at the same time. In terms of Residential Switching, this Normally means it Switches the live and Neutral at the same time. In Layperson Terms, Double Pole switches or DP Switches are Exclusively Designed to Control two Different Electrical Circuits at the same time, which allows the Appliances to Isolate in a safe and reliable manner. Fan or light Combinations and Medical Equipment are some of the many applications for DP Electrical Switches.
4. 2-way Switch
Two Way Switch has three wire connection system. It is a type of switch that has three wire connections. And it really has no off or on. Both sides can be turned on or off depending on how you connect one to the other. Connection of two way switch is different. If you use it as a changer, then put the load in the middle one and two separate lines in the upper and lower ones. Two way switch is a type of multiway switch. Multiway switches have more points and can be controlled in multiple ways simultaneously.
Watch to Youtube:
Thank You for visiting the website. Keep visiting for more Updates.
Read more Single Phase Wiring
Single Phase Wiring
Single Phase Distribution Board Wiring Ampere meter in Voltmeter Wiring Forward Reverse Motor Control Diagram...
Relay in Lamp Wiring
Relay in Lamp Wiring: This diagram shows how to make a relay in lamp wiring. In this circuit, we use an 8-pin relay,...
RCCB With MCB Wiring Diagram
RCCB With MCB Wiring Diagram: This diagram shows how to make a connection to RCCB with MCB wiring. In this circuit, we...
0 Comments
Trackbacks/Pingbacks