3 phase contactor wiring:

This diagram shows 3 phase contactor wiring diagram. In this circuit, we use a DP MCB ( Double Pole Minature Circuit Breaker ), an FP MCB ( Four Pole Minature Circuit Breaker), a magnetic contactor, an overload relay, and a 3-phase motor. First, we need to connect the DP MCB with the power source, then connect the FP MCB with the power source, then connect the magnetic contactor with the FP MCB, then connect the overload, then connect the 3-phase motor. Now this circuit is ready for use.


Diagram of  3 phase contactor wiring:

3 phase contactor wiring diagram

Components needed For this Project:

You can get the components from any of the sites below:

  1. DP MCB 20A [See Buy Click Amazon]
  2. TP MCB 32A [See Buy Click Amazon]
  3. Magnetic Contactor 40A [See Buy Click Amazon]
  4. Motor Protector Overload [See Buy Click Amazon]
  5. 3 Phase Motor (5 HP) [See Buy Click Amazon]

*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Read Also:


Components used to make the 3 phase contactor diagram:

01. DP MCB:

DP MCB In 2 Pole MCB, switching & protection is affected in phases and the neutral. A Double Pole or DP Switch is a Switch that Controls 2 Circuits at the same time. In terms of Residential Switching, this Normally means it Switches the live and Neutral at the same time. In Layperson Terms, Double Pole switches or DP Switches are Exclusively Designed to Control 2 Different Electrical Circuits at the same time, which allows the Appliances to Isolate safely and reliably. Fan or light Combinations and Medical Equipment are some of the many applications for DP Electrical Switches and Electrical components.

02. TP MCB:

The full meaning of MCB is Miniature Circuit Breaker for TP MCB. MCB is an electromagnetic switch or device. If for any reason a short circuit occurs in the supply line or load line (line to line or line to neutral) or in case of overload MCB. the MCB automatically trips and disconnects the main line circuit or household power supply Connection. TP MCB In 3 Pole MCB, Switching & Protection is affected in only 3-Phases and the Neutral is not part of the MCB. 3 pole MCB signifies the Connection of Three Wires for a 3-Phase system Red-Yellow-Blue Phase. 3-Phase Supply Only Without Neutral.

03. Magnetic Contactor:

A magnetic contactor is an electromagnetic switching device. It is generally used for controlling 3-phase Motors. The operation of a magnetic contactor is similar to that of a Relay. but a relay is used for low-power or low-voltage connections, and a magnetic contactor is used for high-power or high-voltage connections. As soon as the supply is applied to the magnetic contactor coil. its normally open contacts are closed and normally closed contacts are opened and the associated devices are also operated. This is how a magnetic contactor works.

04. Overload Relay:

Overload Protection is Protection Against a Running Overcurrent That Would Cause Overheating of The Protected Equipment. Hence, An Overload is Also a Type of Overcurrent flow. Overload Protection Typically Operates on an Inverse Time curve where the Tripping Time Becomes less as the Current Increases. This Overload Protector is an Essential Component for Many Sockets Power Systems. The Top-Quality Overload Protector can Effectively Protect Electrical Products from Power Surges.

05. 3-Phase Motor:

A 3-phase electric motor uses a 3-phase Power Supply to Convert Electric Energy into Mechanical Energy. It contains four Wires (Three hot Wires and one Neutral Wire) and Uses 3 Alternating Currents of the Same Frequency. Since it Generates a Rotating Magnetic Field, it does not need a Capacitor for the Startup. Some 3-phase Motors are Reversible, Which Means they can serve as Generators by Turning Mechanical Energy into Electrical Energy.

Thank You for visiting the website. Keep visiting for more Updates.

Frequently asked questions

What is the 3-phase wiring method?

For 3-phase, you connect line 1 to line 2 and get 208V. At the same time, you [can] connect line two to line three and get 208 volts. And you [can] connect line 3 to line 1 or get 208 volts.

What is the use of 3 phase contactor?

Perhaps the most common industrial use for contactors is the control of electric pumps. The top three contacts of the switch are the respective phases of the incoming 3-phase AC power supply, typically at least 480 Volts for motors 1 horsepower or greater.

What is a 3-phase color code?

In 3-phase power systems, different color codes are used to distinguish between phases. Common color codes of include black for Phase A, red for Phase B, and blue for Phase C. These color codes facilitate proper installation and connection of three-phase equipment or machinery.

How to connect 3-phase AC to single-phase?

Use a 3-phase to single-phase converter, A phase converter could be wired directly to whatever motor you are trying to convert. You'll first run 2 wires from the motor to the converter and then from the converter to your power supply.

How to convert 3-phase to single-phase 220v?

All you need is an electronic converter that 1 converts the AC to DC. A phase converter could then convert this current supply to a single-phase AC. The technique is straightforward, you require a rectifier or are ready.

Read more Single Phase Wiring


Submit a Comment

Your email address will not be published. Required fields are marked *