Automatically Inverter Systems:

This diagram shows how to make automatically inverter systems. In this diagram, we just want to describe how to use an inverter and grid automatic connection with a house load. Here we use just a simple diagram to show you how to easily connect the inverter’s automatic system. In this circuit diagram, we just use a magnetic contactor, a single-phase energy meter, and an inverter. If you want to make this circuit please check our youtube video below link for a clear connection idea.

Diagram of Automatically Inverter Systems:

Automatically Inverter Systems

Components needed For this Project:

You can get the components from any of the sites below:

  1. Single Phase Energy Meter [See Buy Click Amazon]
  2. Inverter [See Buy Click Amazon]
  3. Magnetic Contactor [See Buy Click Amazon]

*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Components used to make the Automatically Inverter Systems:

01. Single Phase Energy Meter:

A Single-Phase Energy Meter is a sort of Watt-Hour meter. It consists of two Electromagnets. Single-Phase Energy Meter is also Popularly known as a watt-hour meter. One Magnet is called the shunt magnet Ml which is Mounted with a Pressure coil. The Pressure coil is a long coil Made of fine Copper wire which is connected across the Supply line. Single-phase energy meters are suitable for measuring single-phase AC current frequencies of 50/60 Hz, which are used for fixed indoor installations.

02. Inverter:

An inverter is an electrical device that converts DC current into alternating current (AC) at any voltage and frequency system that can be operated through suitable transformers, switches, and control circuits. Inverters have no moving parts and are used in a wide range of applications, including high-voltage DC applications in electrical utilities that provide large amounts of power. Inverters are Commonly used to supply AC Power from DC Sources such as Solar Panels or Electric Batteries.

03. Magnetic Contactor:

A magnetic contactor is an electromagnetic switching device. It is generally used for controlling three-phase motors. The operation of a magnetic contactor is similar to that of a relay, but a relay is used for low-power or low-voltage connections, and a magnetic contactor is used for high-power or high-voltage connections. As soon as the supply is applied to the magnetic contactor coil, its normally open contacts are closed and normally closed contacts are opened and the associated devices are also operated. This is how a magnetic contactor works.

Thank You for visiting the website. Keep visiting for more Updates.

Read more Single Phase Wiring

0 Comments

Trackbacks/Pingbacks

  1. Single Phase Wiring – Earth Bondhon - […] Automatically Inverter Systems […]
  2. Deep Fryer wiring diagram – Earth Bondhon - […] Automatically Inverter Systems […]

Submit a Comment

Your email address will not be published. Required fields are marked *