Ampere meter connection

Electrical, single phase Line Wiring | 0 comments

Electrical        1 Phase Wiring        3 Phase Wiring        Power System       Arduino Project        Arduino Board        Robotics Sensors       Robotics Module        Robotics Display       Electronic       Power Electronic        Electronic Project

Ampere meter connection:

This diagram shows how to make an Ampere meter connection. In this circuit, we use an ampere meter, a CT ( Current Transformer ) coil, a single-phase motor, and a DP MCB ( Double Pole Miniature circuit breaker ). First, we need to input power to DP MCB, then input phase to CT, amper meter, and motor. Then input neutral connection to CT, ampere meter, and motor. Now this circuit is ready for use. If you want to know more about this circuit please check our youtube video below the post.

Diagram of Ampere meter connection:

Ampere meter connection

Components needed For this Project:

You can get the components from any of the sites below:

  1. Ampere Meter [See Buy Click Amazon]
  2. CT Coil [See Buy Click Amazon]
  3. DP MCB [See Buy Click Amazon]
  4. Single Phase Motor [See Buy Click Amazon]

*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Read Also:

Components used to make the Ampere meter connection:

01. Ampere Meter:

Ammeter, an instrument, with the help of which the flow of electricity can be measured directly in electrical units, amperes. It is a galvanometer with very low resistance. As a result, the entire current flows through the meter coil. Current is measured with an ammeter. So it can be said that the device which measures the flow of current in an ampere unit is an ammeter. Electric current is the flow of electrons whose unit is an ammeter. So it can be said that the device which measures the flow of current in an ampere unit is an ammeter. An ideal ammeter has no internal resistance. But in reality, the ammeter has little internal resistance. The range of the ammeter depends on this resistance.

02. CT Coil:

A current transformer is a device used to measure alternating currents. The transformer used with the ammeter for high-quality AC current measurement is called a current transformer abbreviated as CT. Current transformers are mainly used to measure high currents. We know that high power lines carry a lot of currents. In this case, an ordinary ammeter or multimeter cannot measure this current. Current transformers are used in Acorn.

03. DP MCB:

DP MCB In Two Pole MCB, switching & protection is affected in phases and the neutral. A Double Pole or DP Switch is a Switch that Controls two Circuits at the same time. In terms of Residential Switching, this Normally means it Switches the live and Neutral at the same time. In Layperson Terms, Double Pole switches or DP Switches are Exclusively Designed to Control two Different Electrical Circuits at the same time, which allows the Appliances to Isolate in a safe and reliable manner. Fan or light Combinations and Medical Equipment are some of the many applications for DP Electrical Switches.

04. Single Phase Motor:

A Single-Phase Motor is an Electrically-Powered Rotary Machine That Can Turn Electric Energy into Mechanical Energy. It Works by Using a Single-Phase Power Supply. Single-phase Motors Are Used in Equipment And Machines That Are Smaller in Size And Require Lower Horsepower. This Includes Equipment Such As Refrigerators, Pumps, Compressors, Fans, and Portable Drills. Single-Phase Motors Have a Similar Construction to The Three-Phase Motor, Including an AC Winding That is Placed on The Stator And Short-Circuited Conductors That are Placed in a Cylindrical Rotor.

Watch to Youtube:

Thank You for visiting the website. Keep visiting for more Updates.

Read more Single Phase Wiring

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *