Arduino Color Mixer

This tutorial is pretty simple and needs a bit Arduino and natural philosophy data, if you are not conversant in Arduino, I will embrace links to guide you thru the tutorial.

In this tutorial, we’ll generate all the doable colors that you simply} will see with just a twist. it’ll conjointly cause you to see through the RGB color model and understanding however today’s displays work.

We’ll conjointly use Arduino analog Input / Output ( noted as I/O later in the tutorial ) and can learn the way to browse and write analog voltages on Arduino pins.

This is my initial trial of the circuit ( a jiffy past, it had a little downside whereas increasing the pot worth, however, I fastened it later. )

Circuit Schematics

Arduino Board [ See Buy Click Banggood | Amazon ]
2x 330 Ohms Resistors [ See Buy Click Banggood | Amazon ]
Potentiometer Resistors [ See Buy Click Banggood | Amazon ]
RGB LED [ See Buy Click Banggood | Amazon ]
Breadboard [ See Buy Click Banggood | Amazon ]
Jump Wires [ See Buy Click Banggood | Amazon ]

*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Source Code



//  Police Strobe Light
//website: https://earthbondhon.com/rotary-potentiometer-rgb-color-mixer/
//

int blue = 9; // Define Digital Pins for each colour of the LED
int green = 10;
int red = 11;

int redPot = A0;
int greenPot = A1; //Define Analog Pins for the 3 potentiometers
int bluePot = A2;


int greenVal = 0; //Create a variable to store the state of each Potentiometer
int blueVal = 0;
int redVal = 0;

const int BUTTON = 7; //Define the button Pin
int state = 0;    //Create a variable to store wether button is on or off
int val = 0;      //Create a variable to store the momentary state of the button
int old_val = 0;  //create a variable to store the previous state of the button

void setup() {
  // put your setup code here, to run once:

  pinMode(green, OUTPUT);  //Set LED's as output's, button as input
  pinMode(blue, OUTPUT);
  pinMode(red, OUTPUT);
  pinMode(BUTTON, INPUT);
  Serial.begin(9600);
}

void loop() {
  // put your main code here, to run repeatedly:
  Serial.begin(9600);                       //Open the serial monitor at 9600 baud

  val = digitalRead(BUTTON);                // Check state of button

  if ((val == HIGH) && (old_val == LOW)) {  //Check to see if state of button has changed
    state = 1 - state;                      //Set the button as either on (1) or off (0)
    delay(10);                      
  }

  old_val = val;                            // Save the previous button reading to compare next time through loop

  greenVal = analogRead(greenPot);          //Read the position of the potentiometers
  blueVal = analogRead(bluePot);
  redVal = analogRead(redPot);

  if (state == 1) {                         //If button is on, set the state of each LED according to position
    analogWrite(green, greenVal / 4);       //of its correspoding potentiometer. Anolog inputs range from 0-1023,
    analogWrite(blue, blueVal / 4);         // while anolog outputs as PMW can be from 0-255. Therefore we must
    analogWrite(red, redVal / 4);           // divide the potentiometer readings by 4 to set the state correctly
    
    Serial.print("RGB(");
    Serial.print(redVal/4); 
    Serial.print(",");
    Serial.print(greenVal/4); 
    Serial.print(",");
    Serial.print(blueVal/4);                 //Print the RGB Code, resuable in any RGB application
    Serial.println(")");
    
    delay(50);
  } else {                                   // If button is off, set all LED's to LOW/off
    analogWrite(green, 0);
    analogWrite(blue, 0);
    analogWrite(red, 0);
    delay(50);
  }
}

Watch to Youtube Video

8 Comments

Newer Comments →

토토임대 on February 11, 2019 at 5:45 pm

What’s up, this weekend is good designed for me, since this time i am reading
this great educational piece of writing here at my residence.
RandReoft on June 26, 2019 at 8:06 am

Amoxicillin Dosage Dogs Baclofene Achat Ligne Propecia How To Make Hair Grow viagra Tegretol Precio Oficial Viagra En Farmacia
Rebempite on July 4, 2019 at 6:29 am

Cialis Cachets Cheapest Tadalafil generic cialis Cytotec Order Viagra E Cialis Insieme Levitra Filmtabletten 20mg
RandReoft on July 8, 2019 at 11:27 pm

Tadalafil Acheter Discount Levaquin Express Delivery Medication Amex cialis price Acquista Cialis On Line Linkdomain Online Tadalis Sx Soft Order

Trackbacks/Pingbacks

Arduino Project | Earth Bondhon - […] Rotary Potentiometer RGB Color Mixer […]

Rotary Potentiometer RGB Color Mixer

Arduino Color Mixer

Circuit Schematics

Components needed for this Project

Watch to Youtube Video

Read more Arduino Project

8 Comments

Trackbacks/Pingbacks

Quick Link

YT

Channel